
Maintaining disk drives
22.Press Enter.
A message similar to the following is displayed:
Waiting for Loop Initialization to complete...
New Logical Nodes under /dev/dsk and /dev/rdsk : c1t3d0s0
c1t3d0s1
c1t3d0s2
c1t3d0s3
c1t3d0s4
c1t3d0s5
c1t3d0s6
c1t3d0s7
No new enclosure(s) were added!!
Note:
Ignore the message No new enclosure(s) were added!!.
23.If you are installing more than one disk drive, wait for the green light on the drive you just installed to light steadily (not flashing) before installing another drive. Repeat Steps 3 through 22.
24.Close the front door and, if necessary, lock it.
25.Continue with Setting up replacement disk drives on page 112.
Issue 2.0 June 2004 107