Setting the remote console modem options
Setting the remote console modem options
The computer uses the U.S. Robotics Sportster 33.6 Faxmodem or the Paradyne Comsphere 3910 modem for remote console access. The options for any other modems must be set based on local instructions.
For instructions for connecting the modem, see Connecting the remote console modem on page 32.
This section includes the following topics:
●Sportster 33.6 faxmodem options on page 41
●Paradyne Comsphere 3910 modem options on page 43
Sportster 33.6 faxmodem options
To set the options on the Sportster 33.6 faxmodem:
1.Set DIP switches 1, 3, 7, and 8 on the back panel of the Sportster modem to the down (ON) position, and switches 2, 4, 5, and 6 to the up (OFF) position.
2.Turn on the remote console modem.
3.At the system console, log in as root.
4.Enter:
/cms/install/bin/abcadm -r ttya
The following message is displayed:
ttya is currently set to be incoming
Are you sure you want to change it? [y,n,?]
5.Enter: y
The following message is displayed:
ttya administration removed
The port monitor turns off.
Issue 2.0 June 2004 41
