Tools
Sun Validation Test Suite (VTS)
The SunVTS supports diagnostics in the following areas:
●Connection test - Minimal access of device to verify its accessibility and availability.
●Functional test (default) - Detailed tests to thoroughly test the device or system when the system is offline (CMS must be turned off). A stress mode in the system or test option can be set only within the offline mode. The stress mode is an extension of offline.
●Functional test (from system monitor) - Safe tests that can be executed on the device or system when it is online (CMS can be on, but testing is safer when it is turned off).
There are two ways to run SunVTS. Avaya recommends that you use either local access through the Common Desktop Environment (CDE) interface, or remote access using an ASCII interface.
Prerequisites
CMS must be turned off.
Using SunVTS
To use SunVTS:
1.Enter:
BYPASS_FS_PROBE=1; export BYPASS_FS_PROBE
This bypasses the file system probe.
2.Do one of the following:
●Enter:
/opt/SUNWvts/bin/sunvts
This accesses the CDE interface.
●Enter:
/opt/SUNWvts/bin/sunvts -t
This accesses the TTY mode (ASCII interface).
Additional references - For more information about using SunVTS, see /opt/ SUNWvts/README and /opt/SUNWvts/bin/vtstty.help.
Issue 2.0 June 2004 185