Maintenance
10.Enter: q
The format> prompt is displayed.
11.Enter: format
The following message is displayed:
Ready to format. Formatting cannot be interrupted and takes XX minutes (estimated). Continue? (y or n)
12.Enter: y
A message similar to the following is displayed:
Begin format. The current time is <timestamp>
Formatting...
done
Verifying media...
pass 0 - pattern = 0xc6dec6de 4923/26/7
pass 1 - pattern = 0x6db6db6d 4923/26/7
Total of 0 defective blocks repaired. format>
13.If you added more than one disk drive, enter disk, and repeat Steps 2 through 12 for each drive.
14.After you have partitioned each drive, enter: q
15.Continue with the restore procedures as described in Setting up replacement disk drives on page 112.
118 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting