Identifying installed PCI cards
Identifying installed PCI cards
If there are problems with the PCI cards, do the following to troubleshoot the problem. If all PCI cards are operational, you can skip this procedure.
At the command prompt, enter:
/usr/platform/‘uname -m‘/sbin/prtdiag -v pg
In the section IO Cards, there is a listing of the PCI cards. The following are examples of some of the entries you may see. The display you see depends on your specific configuration.
.
.
========================= IO Cards =========================
|
|
|
|
| Bus | Max |
|
|
|
| IO | Port | Bus |
| Freq | Bus | Dev, |
|
|
Brd | Type | ID | Side Slot MHz | Freq | Func | State | Name | ||
Model |
|
|
|
|
|
|
|
|
|
I/O | PCI | 8 | B | 3 | 33 | 33 | 2,0 | ok | |
I/O | PCI | 8 | B | 1 | 33 | 33 | 4,0 | ok | |
I/O | PCI | 8 | B | 1 | 33 | 33 | 4,1 | ok | |
I/O | PCI | 9 | B | 0 | 33 | 33 | 3,0 | ok | |
I/O | PCI | 9 | B | 0 | 33 | 33 | 0,0 | ok | |
I/O | PCI | 9 | B | 0 | 33 | 33 | 1,0 | ok | |
I/O | PCI | 9 | B | 0 | 33 | 33 | 2,0 | ok | |
I/O | PCI | 9 | B | 0 | 33 | 33 | 2,1 | ok | |
I/O | PCI | 9 | A | 7 | 66 | 66 | 2,0 | ok | |
. |
|
|
|
|
|
|
|
|
|
. |
|
|
|
|
|
|
|
|
|
In this example:
●Slot 0 has a Dual FastEthernet and Dual SCSI card. There is more than one entry for a this card because the card has two SCSI ports and two Ethernet ports.
●Slot 1 has a FastEthernet card. There is more than one entry for the FastEthernet card because the card has the ethernet port and a Media Independent Interface (MII) port (not used with CMS).
●Slot 3 has an HSI/P card.
●Slot 7 has a graphics card.
Issue 2.0 June 2004 39
