Maintaining PCI cards
5.Select the swsetup option.
6.Select the ACD that you want to set up.
7.Accept the existing defaults for the following:
●Switch name
●Switch model (release)
●Vectoring
●Expert agent
●Central office disconnect supervision
●Local port
●Remote port
8.Select "X.25" and a specific link number when prompted for the link information.
9.Repeat Steps 4 through 8 for each ACD that will use the HSI card.
10.Enter: cmssvc
The CMS Services menu is displayed.
11.Select the run_cms option.
12.Turn on CMS.
13.Test and troubleshoot each switch connection using the procedures in Avaya Call Management System Switch Connections, Administration, and Troubleshooting.
14.Perform a CMSADM file system backup to back up the updated system configuration. See your CMS software installation, maintenance, and troubleshooting document for details.
Issue 2.0 June 2004 89
