Maintaining PCI cards
9. Carefully pull the card from the I/O board. See the following figure.
10. A message similar to the following is displayed in the console window:
Jun 6 12:55:24 sys_name picld[98]: Device PCI1_CARD removed
11.Place the card on an antistatic mat or in an antistatic bag.
12.Do one of the following:
●If you are replacing the card, continue with Installing a
●If you are not replacing the card, install a filler panel into the system rear panel, rotate the purple PCI retaining clip over the back of the filler panel until it snaps into place, remove the ESD wrist strap, close the side door, and return the key switch to its original position.
Issue 2.0 June 2004 67
