Maintaining PCI cards

23.Enter: boot -r

This reboots the system so that it recognizes the new HSI/P card.

Note:

Sometimes the system fails to recognize a newly installed HSI card. If this happens, the command show-devsdoes not show the HSI card and / var/adm/messages fails to recognize the card upon bootup. See the troubleshooting chapter of Avaya Call Management System Switch Connections, Administration, and Troubleshooting for information about troubleshooting HSI/P cards.

24.When the system comes back up, log in as root.

25.Enter: cfgadm

This displays the PCI card configuration after you add the card. Make sure that the new card is displayed.

26.Administer the switch links as shown in Setting up the switch link for each ACD on page 88.

Issue 2.0 June 2004 93

Page 93
Image 93
Avaya V880 manual Maintaining PCI cards