
Tools
3.Enter:
The program displays a message that is similar to the following:
/pci@8,600000/SUNW,qlc@2 |
|
| |||
LiD HA LUN | |||||
0 | 0 | 0 | 21000004cf72f08f | SEAGATE | ST373405FSUN3660438 |
1 | 1 | 0 | 21000004cf721553 | SEAGATE | ST373405FSUN3660438 |
2 | 2 | 0 | 21000004cf7213ea | SEAGATE | ST373405FSUN3660438 |
6 | 6 | 0 | 508002000016b5b1 | SUNW | SUNWGS INT FCBPL9224 |
3 | 3 | 0 | 21000004cf72114b | SEAGATE | ST373405FSUN3660438 |
4 | 4 | 0 | 21000004cf7211ae | SEAGATE | ST373405FSUN3660438 |
5 | 5 | 0 | 21000004cf7214a3 | SEAGATE | ST373405FSUN3660438 |
/pci@8,700000/scsi@1 Target 5
Unit 0 Removeable Tape HP C5683A C005 Target 6
Unit 0 Removeable Read Only device TOSHIBA
Note:
The actual devices that are listed depends on the devices that are installed in the system. This example shows six disk drives, the disk backplane, the tape drive (target 5), and the
4.Fix any obvious errors, such as disconnected cables or external drives without power.
5.When you finish testing, enter the following commands:
!
CAUTION:
If you fail to enter these commands, any reboots that you do in the future will stop at the boot prompt instead of proceeding through the normal
setenv auto-boot? true
boot -r
The system reboots.
Issue 2.0 June 2004 171