| Contents |
Prerequisites | 99 |
Disk drive configurations | 100 |
Required references | 101 |
Replacing disk drives | 101 |
Replacing a single boot disk or replacing data disks | 101 |
Replacing both boot disks | 108 |
Setting up replacement disk drives | 112 |
Partitioning replacement disk drives | 113 |
Adding disk drives (optional) | 119 |
Replacing the | 122 |
Maintaining tape drives | 126 |
Tape drive compatibility | 126 |
Ordering tapes | 126 |
Cleaning the tape drive | 127 |
Replacing the internal tape drive | 128 |
Adding and removing an external tape drive for data migration | 131 |
Maintaining CPU/Memory boards | 136 |
CPU and memory configurations | 136 |
Checking the current memory and CPU configuration | 137 |
Shutting down the system | 138 |
Removing a CPU/Memory board | 139 |
Replacing memory | 140 |
Installing a CPU/Memory board | 142 |
Restarting the system | 145 |
Replacing a power supply | 147 |
Troubleshooting | 151 |
Using the remote console | 152 |
Redirecting the console using Solaris | 152 |
Redirecting the local console to the remote console | 152 |
Redirecting the remote console back to the local console | 154 |
Redirecting the console using OpenBoot mode | 155 |
Redirecting the local console to the remote console | 155 |
Redirecting the remote console back to the local console | 156 |
Using the RSC | 159 |
Redirecting the local console to the RSC | 159 |
Redirecting the RSC to the local console | 160 |
Tools | 161 |
Using the prtdiag command | 162 |
Using the cfgadm command | 165 |
System messages | 166 |
OpenBoot PROM firmware tests | 167 |
Using the OpenBoot PROM tests | 167 |
Test descriptions | 168 |
Probing disk drives | 169 |
Probing all media devices | 170 |
OpenBoot diagnostic tests | 172 |
POST diagnostic messages | 175 |
Issue 2.0 June 2004 5
