3-76
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 3 Adding and Troubleshooting Devices Using Device Management
Using RME Device Selector
b. IP.Address as Variable
c. Contains as Operator
d. Enter 192.168.101 for Value.
Step 5 Click Add Rule Expression.
The rule is added into the Rule Text.
Step 6 Select,
a. OR as Logical Operator
b. IP.Network_Mask as Variable
c. equals as Operator
d. Enter 255.255.255.0 for Value.
Step 7 Click Add Rule Expression.
The rule is added into the Rule Text.
Step 8 Click Search.
The Device Selection dialog box appears.
The devices that satisfied the search condition are selected. That is these two devices are selected.
• 192.168.101.200 with network mask 255.255.255.128
• 192.168.101.201 with network mask 255.255.255.0
• 192.168.102.251 with network mask 255.255.255.0
Using the All Tab
The All tab lists all the devices that are available in the RME. The list is based on the Display Name that
you entered in the Device Properties dialog box when you added devices to Device and Credential
Repository (Common Services > Device and Credentials > Device Management).
List of Device Folders
The following is the list of device folders under the All tab:
• The All Devices folder lists all RME devices. That is, this includes devices in Normal, Alias,
Pending, and Pre-deployed states. This folder does not include devices in Suspended and
Conflicting states.
• The Normal Devices folder lists RME devices that has been successfully contacted by RME or the
device has contacted RME at least once (polling, successful job completion, Syslog receipt etc.).
• The Pre-deployed folder lists RME Device has never ever been reachable by RME (by protocol such
as SNMP).
• The Previous selection folder lists RME devices that were selected in previous RME task in the same
session.
• Saved device list folder lists RME devices that are saved explicitly by you while generating the
Inventory Reports (Reports > Generator), View Credential Verification Report and Error Report
(Devices > Device Management > Device Credential Verification).