19-101
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 19 CLI Utilities
CWCLI
Common Arguments
Common arguments specify parameters that apply to all subcommands. Valid values for
common_arguments are described in the following table.
Command Arguments
Command arguments specify parameters that apply only to specific subcommands. Valid values for
command arguments are described in the following table.
Arguments in square brackets ([]) are optional. Arguments in curly brackets ({}) are required. You must
provide one argument from each group of arguments in curly brackets ({}) that is separated by vertical
bars (|).
Common Arguments Description/Action Usage Notes
-u user Enter a valid CiscoWorks
username.
None
-p password Enter the password for the
username.
You can also specify the password
in a file. See Setting CWCLIFILE
Environment Variable for more
details.
None
[-d debug_level]Set the debug level. Optional
debug_level should be a number between 1-5.
1 —The least information is sent to the debug output
5 —The most information is sent to the debug output.
[-l log_filename]Identifies a file to which Network
Show Commands will write log
messages.
If you do not specify this, the log
output will appear on screen.
Optional
log_filename can be a full path to the file or a filename in the
local directory.
[-m Email ID]Enter your Email ID You will get the output of the CLI operation in an Email.
Command Arguments Description Usage Notes
Command Arguments for createjob
{-device devicelist | -view view_name}Defines devices on which you want the
command set to run.
device_list —List of device names.
Separate these names by commas.
view_name — Name of a device view.