8-83
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Baseline Template
Step 5 Click Save.
A confirmation message appears that the template will be created.
Step 6 Click OK.
A confirmation message appears that the template is created.
Step 7 Click OK.
To add another commandset within the same Baseline template, Disabling-CDP, enter the following
information.
Step 8 Click Save.
A confirmation message appears that the template is updated.
Parent Global
Prerequisite Do not select any value.
Mark as
Prerequisite
Select the check box to mark the commandset as prerequisite.
CLI Commands
Submode interface [intname]
Where, intname is a variable. The variables should not contain spaces.
Ordered Set Select this so that the system considers ordering of commands while performing compliance check.
CLI Commands + ip address [#10\.76\.38\...*#] [netmask]
To find a match for any octet in an IP address you must use \..*.
This checks for subnet mask with IP address starting from 10.76.38.*.
Field User data
Field User data
Commandset Option
Name DisableCDP.
You can enter only alphanumeric characters up to 254 characters. Do not enter any special
characters. This includes spaces, underscores and hyphens.
Parent Global
Prerequisite Select the PrerequisiteCheck from the dropdown menu.
Mark as Prerequisite Do not select the checkbox.
CLI Commands
Submode interface [intname]
Ordered Set Select this so that the system considers ordering of commands while performing compliance check.
CLI Commands + no cdp enable
This will disable the CDP in all the interfaces even if any one interface contains the subnet mask
starting with IP address 10.76.38.*.