11-29
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Administering NetShow Settings
The Job Purge window contains the following information:
To purge NetShow Jobs:
Step 1 Select Resource Manager Essentials> Administration> System Preferences> Job Purge.
The Job Purge dialog box appears.
Step 2 Select NetShow jobs from the list of jobs in the Job Purge dialog box.
You can perform the following tasks in the Job Purge window:
Defining Protocol Order
You can define the protocol order for NetShow through the Protocol Ordering option in the Config
Management feature in RME.
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
Column Description
Application Lists the application for which the purge is applicable.
Status Whether a purge job is enabled or disabled.
Policy This value is in days. Data older than the specified value, will be purged. You can change this
value as required. This is a mandatory field. The default is 180 days.
Job ID Unique ID assigned to the job by the system, when the purge job was created. This Job ID does
not change even if you disable or enable or change the schedule of the purge job.
For the Purge Now task, a Job ID is not assigned. Also, if a Job ID already exists for that
application, this Job ID is not updated for the Purge Now tasks. That is, the job scheduled for
purging is not affected by the Purge Now task.
Scheduled At Date and time that the job was scheduled at. For example: Nov 17 2004 13:25:00.
Schedule Type Specifies the type of schedule for the purge job:
• Daily—Daily at the specified time.
• Weekly—Weekly on the day of the week and at the specified time.
• Monthly— Monthly on the day of the month and at the specified time. (A month comprises
30 days).
Button Description
Schedule Schedule a job purging.
Enable Enable a job for purging after you schedule it.
Disable Disable the purge after enabling a job for purging.
Purge Now Purge a job immediately.