Cisco Systems 4.1 Stopping and Restarting the Change Audit Process

13-21
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 13 Tracking Network Changes Using Change Audit
ChangeAudit Process
Stopping and Restarting the Change Audit Process
The following procedure describes the steps to stop and restart the ChangeAudit Process:
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
Step 1 Select Common Services > Server Configuration > Admin > Processes.
The Process Management dialog box appears.
Step 2 Select the ChangeAudit process.
Step 3 Click either Stop to stop the process or Start to Restart the process.