Cisco Systems 4.1 Managing Command Sets

11-19
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Managing Command Sets
Managing Command Sets
The Command Set Administration task enables the administrator to view the details of an existing
Command Set, create a new Command Set, edit an existing Command Set, and delete an existing
Command Set.
Note You must have Administrator privileges to perform any of these tasks.
• Viewing Command Set Details
• Creating a New Command Set
• Editing Command Sets
• Deleting Command Sets
• Adding and Deleting Adhoc Commands
• System-Defined Command Sets
Viewing Command Set Details
You can view the details of an existing Command Set using this feature.
To view the Command Set details:
Step 1 Select Resource Manager Essentials > Tools > NetShow > Command Sets.
The Command Sets window appears.
Step 2 Click the name of a Command Set in the List of Command Sets.
The Command Set Details pop-up window appears.
Step 3 Expand each of the list tree to view details of the Command Set assigned to each of the device category
in the list.
Step 4 Click Close to close the Command Set Details window.
Creating a New Command Set
You can create a new Command Set using this feature.
To create a new Command Set:
Step 1 Select Resource Manager Essentials > Tools > NetShow > Command Sets.
Show System Performance Displays system interfaces, buffers, processes, memory
Show Tech Info Displays system and configuration information
Command Set Commands