A-108
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
NetShow
NS0004 Could not create Command Set.
Check whether RMEDbEngine is
running properly. If not, restart it
and try again.
RMEDbEngine may be
down.
Check whether RMEDbEngine is
running properly. If not, restart it and try
again.
NS0005 Could not edit Command Set.
Check whether RMEDbEngine is
running properly. If not, restart it
and try again.
RMEDbEngine may be
down.
Check whether RMEDbEngine is
running properly. If not, restart it and try
again.
NS0006 Edit option not allowed for
System-defined command sets.
Select a User-defined command set
to edit.
You may have tried to edit
System-defined command
sets.
You cannot edit System-defined
command sets. Select a User-defined
command set to edit.
NS0007 Adhoc commands are not valid. You may have entered
invalid adhoc commands
Enter valid adhoc commands. See the
Online help for the list of valid adhoc
commands. Separate multiple
commands with commas.
NS0008 This option is not allowed for
System-defined command sets.
You may have tried to
perform an invalid job for
the System-defined
command sets.
Select a user-defined command set and
continue to create or edit jobs.
NS0009 Command Set with this name
already exists.
You may have entered an
existing command set
name.
Enter a unique command set name and
continue to create the command set.
NS0010 You have not selected any adhoc
commands.
You may not have selected
any adhoc commands
while deleting commands.
Select the commands to be deleted and
continue with deleting the command set.
NS0011 The commands are not deleted.
This is because they may be
system-defined or part of a
command set or in the selected
commands list.
You may have selected any
of the following:
• System-defined
commands
• Commands that are
part of a Command Set
• Commands in the
selected list
Select a User-defined commands and
continue.
Also check whether the adhoc command
is in this command set or in any other
command set.
NS0012 You have not specified any adhoc
commands Enter the commands to
be added.
You did not specify any
adhoc commands while
adding adhoc commands in
the new command set.
Enter valid adhoc commands to be
included in the command set and click
Add Adhoc to include the adhoc
command in the new command set.
NS0013 The username is invalid or not
authorized.
You may have entered an
invalid or unauthorized
username while assigning
command sets or showing
assigned command sets.
Enter a valid or authorized username
and continue to assign command sets or
show assigned command sets.
NS0014 You have not selected a command
set.
You did not select a
command set.
Select a command set in the previous
screen and continue to create or edit
jobs.
Message ID Error Message Probable Cause Possible Action