Cisco Systems 4.1 - page 319

8-85
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Baseline Template
Step 5 Click Save.
A confirmation message appears that the template will be created.
Step 6 Click OK.
A confirmation message appears that the template is created.
Step 7 Click OK.
To add another commandset within the same Baseline template, CheckIPTemplate, enter the following
information.
Step 8 Click Save.
A confirmation message appears that the template is updated.
Step 9 Click OK.
Commandset Option
Name PrerequisiteCheck.
You can enter only alphanumeric characters up to 254 characters. Do not enter any special characters.
This includes spaces, underscores and hyphens.
Parent Do not enter anything.
Prerequisite Do not select any value.
Mark as
Prerequisite
Select the check box to mark the commandset as prerequisite.
CLI Commands
Submode interface [#Ethernet.*#]
Ordered Set Do not select the checkbox.
CLI Commands + no cdp enable
Field User data
Field User data
Commandset Option
Name IPCheck.
You can enter only alphanumeric characters up to 254 characters. Do not enter any special
characters. This includes spaces, underscores and hyphens.
Parent PrerequisiteCheck
Submode Do not enter anything
Prerequisite Select the PrerequisiteCheck from the dropdown menu.
Mark as Prerequisite Do not select the checkbox.
CLI Commands
Submode Do not enter anything
Ordered Set Do not select the checkbox.
CLI Commands + ipaddress 10.77.209.8 255.255.255.224
The above command will be deployed in the Ethernet interfaces which have the CDP disabled.