8-78
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Baseline Template
Enter the CLI command under the Baseline Template.
A message appears, Successfully created the template BaselineTemplateName.
Where BaselineTemplateName is the Template Name as given by you.
Step 7 Click OK.
The Baseline Templates window appears with the newly created Baseline template.
Creating an Advanced Baseline Template
To create an Advanced Baseline template:
Step 1 Select Resource Manager Essentials > Config Mgmt > Archive Mgmt > Baseline Templates.
The Baseline Templates dialog box appears.
Step 2 Click Create.
The select Creation Mode dialog box appears.
Step 3 Select Advance as the mode from the Template Details section.
Step 4 Enter the following information:
CLI Commands This is a mandatory field.
Enter the CLI commands.
For example:
Routers CLI Commands
+ set snmp community read-write [read-write-community-name-string]
- set snmp community read-only public
Explanation:
• The first line is considered as a comments since it does not begin with either
“+” or “-”.
• The second line is mandatory since it begins with “+”.
• The third line is disallowed since it begins with “-”.
In the above example, read-write-community-name-string is a command value.
The command value should not contain spaces.
Field Description
Name Name of the Baseline template.
You can enter only alphanumeric characters (including spaces) up to 254 characters. Do not enter
any special characters. This includes underscores and hyphens.
Description Description for the Baseline template. You can enter up to 254 characters.
Device Type Selector Device family for which you can apply this template.
Check the check box to select the device family.