Cisco Systems 4.1 Understanding the Syslog Collector Properties File

14-7
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 14 Enabling and Tracking Syslogs Using Syslog Analyzer and Collector
Viewing Status and Subscribing to a Common Syslog Collector
Understanding the Syslog Collector Properties File
After installing the Syslog Collector on a remote system, you need to check the Syslog Collector
Properties file to ensure that the Collector is configured properly.
The Syslog Collector Properties file is available at this location:
On Solaris:
$NMSROOT/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/csc/data/Collector.pr
operties
On Windows:
%NMSROOT%\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.
properties
The following table describes the Syslog Collector Properties file:
Timezone-Related Properties Description
TIMEZONE The timezone of the system where the Syslog Collector is running. Enter
the correct abbreviation for the timezone. For example, the time zone for
India is IST.
For the correct Timezone abbreviation, see the Timezone file in the
following location:
On Solaris,
/opt/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/n
m/rmeng/fcss/data/TimeZone.lst
On Windows,
%NMSROOT%\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\
nm\rmeng\fcss\data\TimeZone.lst
See Timezone List Used By Syslog Collector.
COUNTRY_CODE Country code for the Syslog Collector.
We recommend that you set the country code variable with the appropriate
country code, to make sure that the Syslog timestamp conversion works
correctly.
For example, if you are in Singapore, you must set the country code
variable as COUNTRY=SGP.