8-6
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Preparing to Use the Archive Management
aaa authentication login default local
aaa authentication enable default none
aaa authorization exec default local
username admin privilege 15 password 0 system
ip ssh authentication-retries 4
ip scp server enable
To configure TACACS User name:
aaa new-model
aaa authentication login default group tacacs+
aaa authentication enable default none
aaa authorization exec default group tacacs+
ip ssh authentication-retries 4
ip scp server enable
User on the TACACS Server should be configured with priv level 15:
user = admin {
default service = permit
login = cleartext "system"
service = exec {
priv-lvl = 15
}
}

Enabling https

To enable the configuration archive to gather the configurations using https protocol you must modify
your device configurations.
To modify the device configuration, follow the procedure as described in this URL:
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2284/products_configuration_guide_cha
pter09186a00801f1d98.html#999607

Configuring Devices to Send Syslogs

Configure your devices for Syslog Analysis if you want the device configurations to be gathered and
stored automatically in the configuration archive when Syslog messages are received.
After you perform these tasks and the devices become managed, the configuration files are collected and
stored in the configuration archive.