9-35
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
For the features of system-defined tasks and a description of the features of a system-defined task dialog
box, see Understanding the System-defined Task User Interface (Dialog Box).
The fields in the Banner Configuration dialog box are:
For each device category, click on Applicable Devices to view the devices in your selection, to which
this task applies.

CDP Task

You can use the CDP system-defined task to configure Cisco Discovery Protocol (CDP) on devices.
The following device categories are supported by this task:
• IOS (including Cable devices)
• Catalyst OS
• Content Engine
For more details, see Table 9-3.
You can enter the details of this task in the CDP Configuration dialog box. (To invoke this dialog box,
see Starting a New NetConfig Job.)
Group Sub Group Field Description
Common
Parameters
Motd Banner Action Select the appropriate option to add or remove a message of
the day banner. Select No Change, if you are modifying an
existing task, and you do not want to change the value in this
field.
Message Enter message, if you selected Add in Action field.
IOS Parameters Exec Banner Action Select the appropriate option to add or remove an Exec
banner. Select No Change, if you are modifying an existing
task, and you do not want to change the value in this field.
Message Enter message, if you selected Add in Action field.
Incoming Banner Action Select the appropriate option to add or remove an Incoming
banner. Select No Change, if you are modifying an existing
task, and you do not want to change the value in this field.
Message Enter message, if you selected Add in Action field.
Login Banner Action Select the appropriate option to add or remove a Login
banner. Select No Change, if you are modifying an existing
task, and you do not want to change the value in this field.
Message Enter message, if you selected Add in Action field.
Slip-PPP Banner Action Select the appropriate option to add or remove a Slip/PPP
banner. Select No Change, if you are modifying an existing
task, and you do not want to change the value in this field.
Message Enter message, if you selected Add in Action field.
CatOS
Parameters
No category-specific
commands.
-This device category does not have any
device-category-specific commands. Use the Common
Parameters group to assign the values.