Cisco Systems 4.1

19-13

User Guide for Resource Manager Essentials 4.1

OL-11714-01

Chapter 19 CLI Utilities

CWCLI

-input inputlist Applicable to all commands

except compareanddeploy,

createdeployparamfile,

deploycomplianceresults, and

directbaselinedeploy,

You must enter -input inputlist to run commands, such as put

and import, on multiple devices.

The parameter, inputlist is a text file containing arguments for

each device. A line starting with # is treated as a comment.

For example, an input list file might look like this:

#comment line

-version version [-save] [-reboot] device_name

-jobid createdeployparamfile Used to specify the job identifier of the previously executed

comparewithbaseline job.

-l createdeployparamfile,

directbaselinedeploy

Specifies the file to log the results of the command.

-listonly write2run Displays difference between the latest running configuration for

device in configuration archive and new configuration that is

generated, without downloading changes.

-m createdeployparamfile,

directbaselinedeploy

Specifies an email address to send the results of the command.

primary_pass import, put, write2run,

write2start, run2start,

start2run,

deploycomplianceresults,

compareanddeploy, reload

Specifies primary user name for connecting to device.

-primary_user import, put, write2run,

write2start, run2start,

start2run,

deploycomplianceresults,

compareanddeploy, reload

Specifies primary user name for connecting to device.

-reboot import, put After successfully pushing a configuration to a device, device

reboots. By default the device does not reboot.

For IOS devices, you must also specify -save to avoid losing

configuration changes when rebooting.

-save import, put Applies to Cisco IOS devices only. Performs a write memory

after pushing the configuration. The default is no write memory.

cwcli config arguments Applicable Commands Description