8-79
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Baseline Template
Step 5 Click Next.
The Add Template Details dialog box appears.
Step 6 Enter the following information:
Field Description
Commandset Options
Name Name of the commandset.
You can enter only alphanumeric characters up to 254 characters. Do not enter any special characters.
This includes spaces, underscores and hyphens.
Parent Enter the parent name for the commandset, if required. This is case sensitive.
You can also use this to logically group the commandsets.
For example: To work on ATM permanent virtual connections (PVCs) commands, you must first get into
the interface mode from the global mode and then run the PVC specific-commands.
Commandset 1: ATM
interface [#atm.*#]
+ ip address [ip-addr] [net-mask]
Commandset 2: PVC
[#pvc.*#]
+ encapsulation aal5 [encap-type]
+ abr [output-pcr1] [output-mcr]
+ ubr [output-pcr2]
+ vbr-nrt [output-pcr3] [output-scr] [output-mbs]
+ vbr-rt [peak-rate] [average-rate] [burst]
+ protocol ip [proto-ip] [type]
+ exit
Here, commandset 1 is the parent for commandset 2.
While RME evaluates the Baseline template, commandset1 is evaluated first and commandset2 is
evaluated next. If either of these commandsets is missing, the template is considered non-compliant.