11-16
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Archiving NetShow Job Output
The Output Archive page appears.
You can use the Filter option to filter the archives based on All or Job ID or Description as the criteria.
You can provide a search string in the text area and click Filter to filter the archives based on the search
criteria.
Step 2 Select an Archive ID and click View.
The NetShow Archive Details pop-up appears, displaying the day, date, and time details in the header at
the top of the page. The Archive ID appear in the header of the Archive Result.
The Archive Details pop-up has two panes. The Archive Details appear in a tree format with Device
Details and Deployed Devices in the left pane. The list of devices appear in a table in the right pane.
The following table describes the Archive Details page.
Step 3 Click the device name link in the Device Details table.
The NetShow Device Details pop-up appears with the device name, Command Sets and commands in
the left pane and the command output in the right pane.
By default, the command output is a consolidated output for all the commands.
To get specific outputs for each command:
a. Select a command from the Device list tree in the left pane.
b. Click Analyze Output to view and analyze the output of the command.
If the selected command’s output appears as No Output in the right pane, the Analyze Output button is
disabled.
You can mask the credentials shown in the output of show commands. See Masking Credentials for more
details.
The Cisco.com Profile pop-up dialog box appears.
Step 4 Enter your Cisco.com Username and Password in the dialog box.
Folder Description
Archive Details Expand the list tree to view the Device Details and Deployed Devices.
Device Details Expand the list tree to view the Deployed Devices.
Deployed
Devices
Contains detailed job results for each device in a table:
• Device—List of devices on which the job ran.
• Status—Status of the device deployment (success or failure.)
• Protocol Used—Protocol used for the device.
• Message
–
If the job failed on the device, the reason for failure appears.
–
If the job succeeded on that device, the message Deploy Successful appears.
This page displays the number of rows you have set for display in the Rows per page field. You can increase
the rows up to 50 for each page. You can navigate among the pages of the report using the navigation icons
at the bottom right of this table.
Click the device name link to view the details of command sets and commands on the device. Go to Step 3
for details.