9-89
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Group Sub-Group Field Description
Spectrum
Management
Spectrum
Group
Action Select one of these options:
• No Change—Does not allow you to make any changes in
the Spectrum group of fields.
• Add—Allows you to add options.
• Remove—Allows you to remove options.
Spectrum Group ID [1 - 32] Enter the Spectrum Group ID. The range for Spectrum Group
ID is between 1—32.
Frequency Setting Select one of these frequency settings:
• Band—Enter a range of frequencies.
• Fix—Enter a fixed frequency.
Start Frequency [5 - 42
MHz]
Enter the start frequency.
The range of frequencies is:
• 5MHz—65MHz for Cisco
• uBR-MC16E cable interface card
• 5MHz—42MHz for all other cable interface cards
End Frequency [5 - 42 MHz] Enter the end frequency.
• The range of frequencies is: 5MHz—65MHz for Cisco
• uBR-MC16E cable interface card
• 5MHz—42MHz for all other cable interface cards.
This field is enabled only if you choose Fix as the value in the
Frequency Setting filed, in the Spectrum Group.
Optional
Configuration
Power Level [-10 - 25
dBmV]
Enter the Power Level.
The valid power levels are between -10dBmV - +25dBmV.
The default is 0dBmV.
Hop Period [5 - 300 Sec] Enter the Hop period.
The valid range for a Hop Period (in seconds) is between
1-3600. The default for Advanced Spectrum Management is
25 seconds. For all others, the default is 300 seconds.
This field is enabled only if you choose Add as the value in
the Action field, in the Spectrum Group.
Hop Threshold [0 - 100%] Enter the Hop Threshold.
The valid range for Hop Threshold is between 1 - 100%. The
default is 20%.
This field is enabled only if you select Add as the value in the
Action field, in the Spectrum Group.
Shared RF Spectrum Group
Configuration
Indicates the upstream ports in a spectrum group can share the
same upstream frequency.