19-103
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 19 CLI Utilities
CWCLI
[-notificationmail email] Defines the e-mail addresses of persons
who need to get mails when the job has
started and completed.
email can contain a comma separated
email list.
If you do not specify this option in the
CLI, the e-mail address specified in the
UI are used.
[-execution Sequential|Parallel]Execution policy. Specifies the order in
which you want to run the job on the
devices.
Parallel—Allows the job to run on
multiple devices at the same time.
By default, the job runs on five devices
at a time.
Sequential—Allows the job to run on
only one device at a time.
If you do not specify these options in the
CLI, the corresponding settings from the
UI are used.
{-primary_user username
-primary_pass password}
Primary username and password to
connect to devices.
{-enable_pass password}Execution mode password to connect to
device.
[-input input file]Input file containing the details of the
subcommands
If you are specifying the input file, you
do not need to specify the
subcommands.
Command Argument for listjob
{-status status}You can specify the status of the job.
This can be:
• All jobs
• Running jobs
• Completed jobs
• Pending jobs.
Command Argument for canceljob
{-id Job ID}You can cancel only one job at a time.
Command Argument for deletejob and jobdetails
Command Arguments Description Usage Notes