Cisco Systems 4.1 - page 922

A-82
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
Software Management
SWIM1097 Selected Bootloader image
is a lower version than the
version of the Bootloader
running on the device.
The Bootloader image
version running on the device
is the latest.
Check whether the higher version is available
for upgrading.
SWIM1098 The selected image is
lower than the running
image on the device.
The image version running on
the device is the latest.
Select a higher image for device software
upgrade.
SWIM1099 Image Upgrade procedure
may revert to the
SSH/Telnet-based
approach, based on the
MIB instrumentation on
the running image.
The SSH/Telnet passwords
may not be configured in the
Device and Credential
Repository.
Make sure that appropriate SSH/Telnet
passwords are configured in the Device and
Credential Repository.
SWIM1100 Cannot find SNMP-V2
Read-Write Community
String in the Device and
Credential Repository.
The SNMP-V2 credentials
may not be correctly
configured in the Device and
Credential Repository.
Check whether the SNMP-V2 credentials are
configured correctly in the Device and
Credential Repository.
SWIM1101 This Device Upgrade
requires opening an
SSH/Telnet connection to
the device.
Enable password for the
device is not configured in
Device and Credential
Repository.
Make sure that appropriate SSH/Telnet
passwords are configured correctly in the
Device and Credential Repository.
SWIM1102 This Device Upgrade
requires opening a
SSH/Telnet connection to
the device.
There was an error while
checking the credentials of
the device.
Make sure that appropriate SSH/Telnet
passwords are configured correctly in the
Device and Credential Repository.
SWIM1103 Selected image may not be
compatible to the device.
Image belongs to the same
device family as the running
image on the device.
However, it is identified as
non-compatible.
Check the Cisco.com documentation whether
any caveats are identified for the selected
image.
SWIM1104 The total space on the
selected partition is not
enough to upgrade all of
the selected modules.
Multiple modules may be
selected for upgrading on the
same partition.
Select individual partitions for the selected
modules, or deselect some modules.
SWIM1105 Image status for the
selected image cannot be
determined.
The selected image might be
in the Deferred status.
Ensure that the image is not in the Deferred
status. See the relevant documentation on
Cisco.com before upgrading the images.
SWIM1106 Image selected for upgrade
is compressed in .tar
format. Flash will be
overwritten while
upgrading the image.
None. Ensure that necessary backup jobs are
completed before upgrading.
Message-ID Error Message Probable Cause Possible Action