Cisco Systems 4.1 Syslog Task

9-67
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Syslog Task
You can use the Syslog system-defined task to configure the collection of syslog messages from devices.
The following device categories are supported by this task:
• IOS (including Cable devices)
• Content Engine
• CSS
• NAM
• PIX OS
For more details, see Table 9-3.
You can enter the details of this task in the Syslog Configuration dialog box. (To invoke this dialog box,
see Starting a New NetConfig Job.)
For the features of system-defined tasks and a description of the features of a system-defined task dialog
box, see Understanding the System-defined Task User Interface (Dialog Box).
The fields in the Syslog Configuration dialog box are:
Group Sub-group Field Description
Common
Parameters
Logging Host Action Select the required option to enable, disable, or make no change to list
of hosts that receive syslog messages.
Ex:
host1.domain,hos
t2,1.2.3.4:
Enter IP address of hosts to add or remove from list of hosts that receive
syslog messages.
Separate multiple addresses with commas.
IOS Parameters
Logging On Action Select the required option to enable, disable, or make no change to
syslog state.
Select No Change to make syslog setup changes without enabling or
disabling syslog logging.
Logging
Facility
Action Select the required option to enable, disable, or make no change to
syslog logging facility.
Parameter Select the logging facility to which to log syslog messages.
Logging Level Buffered Action Select the required option to enable, disable, or make no change to the
buffered logging level.