10-38
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 10 Editing and Deploying Configurations Using Config Editor
Reviewing the Work Order
Reviewing the Work Order
The work order summarizes the job you created. If you find any changes missing when you review the
work order you can go back and change the options.
Enable Job
Password
This appears for all
the applications in
the dropdown list.
The Job Password Policy is enabled for all the jobs.
The Archive Management, Config Editor, and NetConfig jobs
use this username and password to connect to the device, instead
of taking these credentials from the Device and Credential
Repository.
These device credentials are entered while scheduling a job.
None.
Fail on Mismatch of
Config Versions
This appears if you
select either the
Config Editor or
NetConfig
application.
The job will be considered a failure when the most recent
configuration version in the configuration archive is not
identical to the most recent configuration version that was in the
configuration archive when you created the job.
None.
Delete Config after
download
This appears if you
select Config
Editor.
The configuration file is deleted after the download.
Execution Policy
This appears for all
the applications in
the dropdown list.
Allows you to configure the job to run on multiple devices at the
same time (Parallel execution) or in sequence (Sequential
Execution).
If you select Sequential execution,
you can click Device Order in the Job
Schedule and Options dialog box to
set the order of the job.
1. Select a device in the Set Device
Order dialog box.
2. Either:
• Click the Move Up or Move
Down arrows to change its place
in the order. Click Done to save
the current order.
Or
• Close the dialog box without
making any changes.
User Configurable Select this check box next to any field to make corresponding
policy user configurable.
You can configure a
user-configurable policy while
defining job. You cannot modify
non-user-configurable policies.
Field Name Description Usage Notes