8-84
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Baseline Template
Step 9 Click OK.
Step 10 Click Finish.
A confirmation message appears that the template will be saved.
Step 11 Click OK.
A confirmation message appears that the template is updated.
Step 12 Click OK.
The Baseline Configs window appears with the details of Disabling-CDP Baseline template.
Example 2
This is a procedure to create an Advanced Baseline Template to check the presence of the command "ip
address 10.77.209.8 255.255.255.224" in the Ethernet interfaces which has cdp disabled.
Step 1 Select Resource Manager Essentials > Config Mgmt > Archive Mgmt > Baseline Templates.
The Baseline Templates dialog box appears.
Step 2 Click Create.
The Select Creation Mode dialog box appears.
Step 3 Select Advanced and click Next.
The Create a Baseline dialog box appears.
Step 4 Enter the following information:
Field User data
Template Name CheckIPTemplate
You can enter only alphanumeric characters up to 254 characters. Do not enter any special characters
except underscores.
Device Type Routers
Description Baseline Template for Interface level check.