Cisco Systems 4.1 HTTP Server Task

9-43

User Guide for Resource Manager Essentials 4.1

OL-11714-01

Chapter 9 Making and Deploying Configuration Changes Using NetConfig

Using System-defined Tasks

For each device category, click on Applicable Devices to view the devices in your selection, to which

this task applies.

HTTP Server Task

You can use HTTP Sever to configure HTTP access on IOS devices which have been configured for VPN

functionality.

The following device categories are supported by this task:

• IOS (including Cable devices)

• Catalyst OS

For more details, see Table 9-3.

You can enter the details of this task in the HTTP Server Configuration dialog box. (To invoke this dialog

box, see Starting a New NetConfig Job.)

For the features of system-defined tasks and a description of the features of a system-defined task dialog

box, see Understanding the System-defined Task User Interface (Dialog Box).

The fields in the HTTP Server Configuration dialog box are:

Encrypted Select this option to encrypt the password.

CatOS Parameters Password Apply Command on Modules Select to apply the command on the modules.

If you have selected Disable as the action in

the Common Parameters group, then the

password will be removed.

PIX Parameters Level(0-15) Set the password level. The level can be

between 0 and 15. 15 is the default level.

Encrypted (Password should be

16 characters)

Select this option if the password you are

entering is already encrypted. If you select this

option ensure that your password is 16

characters.

Group Sub-group Field Description

Common

Parameters

Server Action Select an option to enable, disable or make no change to the

HTTP access on the device.

Port Number [0-65535] Specify the HTTP server port number.

Set to Default Select this option to set the default port (80).

IOS Parameters Authentication Action Select an option to enable, disable or make no change to the

authentication method.