11-21
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Managing Command Sets
The Select Device Category window appears with the device types that you have already selected and
the Command Set name.
If you want to edit the Command Set for the particular device type, select the device type and click Next.
The Select Commands window appears.
Step 3 Select the command or commands you want to assign to the selected device or group of devices from the
Available Commands pane in the Select Commands window.
Select All Commands from the Commands Selection drop-down list to list all the commands
available for the device or group of devices.
Select Common Commands from the Commands Selection drop-down list to list only the common
commands.
If you have a device category with no commands, it will not be considered for populating the Common
Commands list.
Step 4 Click:
Add to add the selected commands.
Thecommands move to the Selected Commands pane in the Select Commands dialog box.
Remove to delete commandsfrom the Selected Commands pane.
Enter the commands in the Adhoc Commands text box and click Add Adhoc.
Select the adhoc commands from the Selected Commands pane and click
Delete Adhoc to remove the adhoc commands.
See Adding and Deleting Adhoc Commands for more details on Adhoc Commands.
Step 5 Click Finish to edit the Command Set.
A message appears: Command Set Command Set name edited successfully.
Step 6 Click OK.

Deleting Command Sets

You can delete a Command Set or a list of Command Sets using this option. You can delete only
user-defined Command Sets.
To delete Command Sets:
Step 1 Select Resource Manager Essentials > Tools > NetShow > Command Sets.
The Command Sets window appears.
Step 2 Select the Command Sets you want to delete in the List of Command Sets and click Delete.
A message appears: Selected Command Set(s) will be deleted.
Step 3 Either:
Click OK to confirm the deletion of the Command Sets.
Or
Click Cancel to cancel the deletion of the Command Sets.