Cisco Systems 4.1 Launching show Commands From Device Center

11-24
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Launching show Commands From Device Center
To assign Custom Command Execution privilege:
Step 1 Select Resource Manager Essentials > Tools > NetShow > Assigning Command Sets.
The Assign Command Sets dialog box appears.
Step 2 Enter the username in the Username field.
Step 3 Check the Custom Command Execution check box to assign custom command execution privilege to this
user.
Launching show Commands From Device Center
You can run show commands from Device Center.
To run show commands from Device Center:
Step 1 Select Device Troubleshooting > Device Center.
The Device Center window appears with the device selector on the right and Device Center overview
information on the left section of the screen.
Step 2 Either:
• Enter the device name of the device you want to select and click Go in the Device Selector field.
Or
• Select a device from the list-tree.
The Device Summary and Functions Available panes appear in the right section of the screen.
Step 3 Select Run Show Command from the Management Tasks tab under the Functions Available pane.
The Select Command Set window appears.
Step 4 Select the Command Set from the Command Set List pane in the Show Commands Execution window.
Step 5 Enter the custom commands in the Custom Commands text box.
Step 6 Click Next.
The Set Schedule Options page appears with the Job Schedule and Options dialog box.
Step 7 Enter the following information: