A-30
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
Config Editor
Config Editor
This section provides the troubleshooting information for the Config Editor application:
Message-ID Error Message Probable Cause Possible Action
CEDT0001 No device selected You have not selected a device. Select a device and try again.
CEDT0002 There is no
configuration file for the
device.
There is no configuration file for
the selected device in the
archive.
Perform Synch Archive to get the
configuration file for the device
CEDT0003 Modified Config not
selected.
You have not selected a
modified configuration from the
Modified Configs list.
Select a configuration file from Modified
Configs list.
CEDT0004 No Config Selected for
Download.
You have not selected a
configuration file for
downloading either from the
archive or from Modified
Configs list.
Select a configuration file for downloading
either from the archive or the Modified
Configs list.
CEDT0005 Enter job description. You have not entered a job
description while creating a job
Enter the job description. This is mandatory.
CEDT0007 No job selected. You have not selected a job. Select a job
CEDT0009 Job {JobId} cannot be
{Action}.
You have tried to do any of the
following:
• Edit a completed job
• Copy an incomplete job
• Stop a completed job
• Stop an already stopped job.
Select the appropriate job and appropriate
action.
CEDT0010 Cannot get details for
Job {JobID}.
The Job was recorded
incorrectly.
None.
CEDT0011 Could not get the
summary of the job.
None. Check Cfgedit.log for more details.
CEDT0012 Job not found. None Check Cfgedit.log for more details.
Contact Cisco TAC with log details for
further assistance.
CEDT0013 Some change in Jsp
leading to incompatible
with Action class.
None. Check cfgedit.log for more details.
Contact Cisco TAC with log details for
further assistance.
CEDT0014 Label not selected for
search
You have tried to search labeled
configurations without selecting
a label
Select a label from the drop down.
CEDT0015 Cannot open
configuration file.
None. Check Cfgedit.log for more details.
Contact Cisco TAC with log details for
further assistance.