9-53
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
RADIUS Server Configuration Task
You can you use the RADIUS system-defined task to configure RADIUS on devices.
The following device categories are supported by this task:
• IOS (including Cable devices)
Access Type Select the required action type:
• QueryOnly
• ServeOnly
• Serve
• Peer
ACL Number [1-99] Enter the ACL number. It should be a value between 1 and
99.
NTP Trusted
Key
Action Select to add, remove, or make no change to the NTP
trusted Key.
Key Number
[1-4294967295]
Enter the Key number. It must be a value between
1—4294967295.
Verify Key Number Re-enter the Key number to verify.
CatOS
Parameters
NTP Server Server Key [Range:1 to
4292945295]
Enter the NTP server Key. The value must be between 1 to
4292945295.
Verify Server Key Re-enter the Key to confirm.
NTP Client Client Action Select to enable, disable, or make no change to NTP client.
NTP
Authentication
NTP Authentication Select to enable, disable, or make no change to NTP
authentication.
NTP Key Action Select to add, remove, or make no change to the NTP Key.
Key Number [1 to
4292945295]
Enter the NTP server Key. The value must be between 1 to
4292945295.
Verify Key Number Re-enter the Key to confirm.
Type Select the required Key type.
MD5 Number [Max 32
chars]
Enter the MD5 number. It should be a maximum of 32
characters.
CE Parameters NTP Server Action Select to enable, disable, or make no change to the NTP
server.
Server Type Select the required server type.
CSS Parameters NTP Server Version Select the required NTP server version.
NTP Server
Poll Interval
Action Select to add, remove, or make no change to the NTP poll
interval.
Poll Interval [16-16284
seconds]
Specify the poll interval. The value must be between
16—16284 seconds.
Group Sub-group Field Description