A-68
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Appendix A RME Troubleshooting Tips and FAQs
Software Management
SWIM0118 Software Management
application could not
verify the inputs since
there was no running
image information.
The device package may
not have been installed.
You can install it now and
retry the task or you can
install it before running the
job. However, the results
may not be accurate.
Advanced Distribution Flow:
Either:
• The selected device is not
yet deployed in the
network (pre-provisioned
device)
Or
• It is still not supported by
RME.
Schedule the distribution job for a future date
when the device is deployed
Otherwise, the device package for this
unsupported device will be installed and
available in the RME server.
SWIM0119 Software Management
application could not
verify the flash inputs
since there was no flash
information available.
Edit the expert input file
and verify it again. If you
do not want to edit the
expert input file, you can
continue with the task by
clicking Next.
However, the results may
not be accurate.
The selected device does not
have any Flash related
information.
Generally the flash details are
present in the Inventory. You
can check the Detailed
Device Report to see the flash
details.
If there are no flash details for
this device, Software
Management will allow the
user to schedule a distribution
job without verifying the
flash details.
None.
SWIM0120 Software Management
application did not verify
the inputs since there was
no running image
information. If you find
that the device package is
not installed, install it
before running the job.
The image distribution will
proceed based on the
unverified inputs.
However, the results may
not be accurate.
Advanced Distribution Flow:
Either:
• The selected device is not
yet deployed in the
network (pre-provisioned
device)
Or
• It is still not supported by
RME.
Schedule the distribution job for a future date
when the device is deployed.
Otherwise, the device package for this
unsupported device will be available and
installed in the RME server.
Message-ID Error Message Probable Cause Possible Action