9-51
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
For each device category, click on Applicable Devices to view the devices in your selection, to which
this task applies.
PIX
Parameters
ISAKMP Action Select to enable, disable, or make no change to ISAKMP.
Interface Select the interface:
• Inside
• Outside
ISAKMP
Policy
ISAKMP
Policy Priority
Action Select to add, remove, or make no change to ISAKMP policy priority.
Priority
[1-65534]
Enter the policy priority number
Value must be between 1—10000.
Encryption Action Select to enable, disable, or make no change to encryption type.
Type: Select the type of encryption:
• aes
• aes-192
• aes-256
• des
• 3des
Hash Action Select to enable, disable, or make no change to the hash algorithm.
Algorithm Select type of hash algorithm:
• sha
• md5
Authentication Action Select to enable, disable, or make no change to the authentication method.
Method Select the type of authentication method:
• rsa-sig
• pre-share
Group Action Select to enable, disable, or make no change to the Diffie-Hellman group
identifier group.
Value Enter the Diffie-Hellman group identifier.
Value must be 1, 2 or 5.
Lifetime Action Select to enable, disable, or make no change to the lifetime value.
Seconds
[120-86400]
Enter the lifetime in seconds.
Value must be between 120—86400 seconds.
Group Sub-group Field Description