Cisco Systems 4.1 Template Definition Example 6, Template Definition Example 7, Template Definition Example 8, Template Definition Example 9

6-49

User Guide for Resource Manager Essentials 4.1

OL-11714-01

Chapter 6 Managing Inventory Collection and Polling Using Inventory

Using Inventory Custom Report Templates

This custom report is generated with the FlashFile size and Image version of all selected devices. The

OR condition without criteria means all flash device sizes.

Template Definition Example 6

If your template definition is the following:

Interface:Type:equals:gigabitEthernet

OR:Interface:Type:contains:voiceFXS

This custom report is generated with Interface types of the devices which have interfaces of type

gigabitEthernet or voiceFXS.

If your template definition has the following rules:

UDF:user_defined_field_2:contains:xyz

OR:Flash Device:Total Flash Device Size (MB):>:45

This custom report is generated with user_defined_field_2 and Total Flash Device Size (MB) for the

devices whose Total Flash Device Size is greater than 45MB or whose user_defined_field_2 value

contains string xyz.

If your template definition has the following rules:

Chassis:Port Count

AND:IP Address:IP Address

AND:Processor:NVRAM Used (KB)

AND:Processor:Port Count

AND:Processor:RAM Size (MB)

AND:System:Description

AND:Interface:Type

OR:UDF:user_defined_field_2

AND:Flash Partition:Free (KB)

This custom report is generated for all given attributes for the selected devices. If any attribute is not

collected from the device or if the attribute is not applicable for any device “N/A” will be displayed in

the report.

If your template definition has the following rules:

Memory:Type:equals:Processor Memory

AND:Memory:Type:equals:I/O

This custom report is generated for the devices which have both Processor memory and I/O memory.