Cisco Systems 4.1 Running the cwcli inventory deletedevice Command

19-89

User Guide for Resource Manager Essentials 4.1

OL-11714-01

Chapter 19 CLI Utilities

CWCLI

The credentials that are exported depends on the data that you have provided when you added the devices

to Device Credentials Repository.

Running the cwcli inventory deletedevice Command

You can use this command to delete devices from RME.

The device information will be retained in the Device Credentials Repository. This information will not

be removed till you delete the device from Device Credentials Repository.

The command syntax for cwcli inventory deletedevice is:

cwcli inventory deletedevice -u userid -p password [-d debuglevel]

[-m email] [-l logfile] [-view name] {-device list | -input inputfile | ipaddress list}

Arguments in square brackets ([]) are optional; arguments in curly braces ({}) are required. You must

provide one argument from each group of arguments in curly braces ({}) that is separated by vertical

bars (|).

If you do not specify an optional argument, the default value configured for the system is used.

The following table describes the arguments that are specific to cwcli inventory deletedevice

command. The other common arguments used by cwcli export are explained in Using the cwcli export

Command.

This section provides some examples of usage for the

cwcli inventory deletedevice command.

cwcli inventory deletedevice -u admin -p admin -device 10.76.10.10

<cwcli> INFO - Total number of devices deleted successfully: 1

SUMMARY

========

Successful: Delete Device: Success

Argument Description Usage Notes

-input inputfile -input inputfile—Enter the full path of the

file containing comma-separated list of

device display name as entered in Device

Credentials Repository.

The input file should be of this format:

-device 1.1.1.1,2.2.2.2,3.3.3.3

-device 1.1.1.1

-device 2.2.2.2

-device 3.3.3.3

Mandatory

You must also enter the file format either CSV

or txt.