Fluke PM-3370B Recall instrument setup, 22COMMAND Reference, Syntax RCL numericdata Description

4 - 22COMMAND REFERENCE

*RCL	Recall instrument setup
Syntax:	*RCL <numeric_data>

Description:

The *RCL command restores instrument settings from one of the internal memory registers 0 .. 10. The settings in memory register 0 are standard settings, which can only be recalled. The settings in the memory registers 1 through 10 are programmable by sending the *SAV command.

After power on the current settings, just before power off, are restored. These current settings are saved in non-volatile memory (battery backed-up).

Example:
Send → *SAV 2	Stores the actual instrument settings into
	memory register 2.
.
.
Send → *RCL 2	Restores the instrument settings from memory
	register 2.

Front panel compliance:

The *SAV/*RCL commands are the remote equivalent of the front panel softkey operation via the SETUPS/RECALL menu. The standard settings stored in memory 0 can be changed via the front panel FRONT SETUPS menu.