Fluke PM-3390B, PM-3380B, PM-3370B, PM-3394B, PM-3384B Nodenr nodelength firstbyte ... lastbyte

4 - 106 COMMAND REFERENCE

Limitations:

For the PM33x0B CombiScope instruments:

-Input channel 3 (CH3) is not applicable.

-Input channel 4 (CH4) is limited to external trigger view.

Example:
Send → SYSTem:SET? 32	Queries for cursor instrument settings.
Read ← <curs_setup>	Reads cursor instrument settings.
Send → SYSTem:SET?	Queries for all instrument settings.
Read ← <settings>	Reads all instrument settings.
.
.
Send → SYSTem:SETSP	Sends the header plus a space without
Send → <settings>	message termination (EOI off).
	Sends all instrument settings, plus
	message termination (EOI on).

Programming tip:

The number of <settings> bytes can be determined from the second byte of the returned <settings> information itself. A node is always built up as follows:

<node_nr> <node_length> <first_byte> ... <last_byte>

The second <node_length> byte indicates the number of bytes to follow.

If no <node_nr> was specified the number of bytes must be determined while reading the <settings>.

Front panel compliance:

The SYSTem:SET? query followed by the SYSTem:SET command gives a remote possibility to save and recall complete or partial instrument setups.