Fluke PM-3380B MATH1/2 settings, Display settings, Trace intensity settings, Autorange settings

SUMMARY OF SYSTEM SETTINGS		E - 3
65 66	MATH1/2 settings	length = 22 bytes
	MATH1/2 selection, limited on/off, FFT filter
	Hamming/Hanning/Rectangle, adjustify scale/offset,
	source1/source2, Y-cursors/X-cursors, mathematics type add,
	subtract, multiply, filter, integrate, differentiate, fast fourier,
	histogram, source MATH1/2 CHn, Mi_j, scale, offset, filter window
	width, differentiate window width, FFT area left/right border, Y-
	offset integrate limited area, FFT absolute/relative readout.
80	Display settings	length = 27 bytes
	settings display on/off, ground and trigger level indication on/off,
	dots join on/off, X versus Y on/off, status view on/off, window on/off,
	menu number, menu on/off, hold-off time, trace separation, X
	source (X versus Y mode), display_trace definition 1 to 8, sine
	wave interpolation on/off.
81	Trace intensity settings	length = 5 bytes
	analog trace intensity, mtb/dtb intensity ratio.
82	Display trace position settings	length = 34 bytes
	display_y_pos trace 1 to 8, display_x_pos trace 1 to 8.
96	Setup label text (22 characters)	length = 24 bytes
	setup label text characters.
112	Autorange settings	length = 8 bytes
	auto time base on/off, auto attenuation CH1/2/3/4 on/off, degrees
	mode on/off, 4-stroke/normal mode, auto time base degrees/time
	factors.
128	Real-time clock settings	length = 3 bytes
	clock format selection.
240	Service (factory) settings	length = 5 bytes
	auto/manual_cal adjustments.