Fluke PM-3370B CALCulatenDERivativePOINts CALCulatenDERivativeSTATe, Switches the differentiate

4 - 32 COMMAND REFERENCE

CALCulate<n>:DERivative:POINts

CALCulate<n>:DERivative:STATe

Syntax: CALCulate<n>:DERivative:POINts <numeric_data> MAXimum MINimum

CALCulate<n>:DERivative:STATe <Boolean>

<n> [1] 2

<numeric_data> 3, 5, 7, ..., 127, 129

Alias: An alias for :DERivative is :DIFFerential.

Query form: CALCulate<n>:DERivative:POINts? [MINimum MAXimum]

Response: 3 5 .. 129

If MINimum was specified, 3 is returned.

If MAXimum was specified, 129 is returned.

Query form: CALCulate<n>:DERivative:STATe?

Response: 0 1

0Differentiate function turned off.

1Differentiate function turned on.

Description:

The CALC<n>:DER:POIN command specifies the width of the differentiate window. The width of the differentiate window can be an odd number of points, varying from 3 points to 129 points in increments of 2 points. The differentiate window can be turned on with the CALCulate:DERivative:STATe command.

The CALC<n>:DER:STAT command switches the differentiate function on or off. The result of the differentiate function is stored in M1_n for CALCulate1 and in M2_n for CALCulate2 dependent on the input source CHn or Mi_n (n = 1, 2, 3, 4). After a *RST command, the differentiate window width is 5 points and the differentiate function is turned off.

Example:
Send → CALCulate:DERivative:POINts 21	The width becomes 21 points.
Send → CALCulate:DERivative:STATe ON	Switches the differentiate
	function on.

Front panel compliance:

The CALCulate1 and CALCulate2 commands use the MATH1 and MATH2 features of the CombiScope instrument.