Fluke PM-3384B Measure 1, Math 1, Cursors, Trace intensity User text Data cleared Display

4 - 24		COMMAND REFERENCE
	FUNCTION:	DEFAULT SETTING(S):
	TB mode	Realtime only OFF
		Event delay OFF
		Acquisition length 512 (samples of 16 bits)
		Trigger Level MAX
	Acquire	Averaging OFF
		Peak detection OFF
		Envelope OFF
		Autoranging attenuators OFF
	Acquisition	Locked
	Pre-trigger view	50% of MTB (-5 ms)
	Bandwidth limiter	OFF
	Measure 1 & 2	OFF
	Math 1 & 2	OFF
	Cursors	OFF
	Trace intensity	0.18
	User text	Data cleared
	Display	OFF
	Beeper	ON
	Hardcopy PRINT & PLOT	Plotter; HPGL
	Pass/Fail testing	OFF

•Cancels or aborts any instrument-dependent action.

•Cancels the effect of the *OPC command and the *OPC? query.

•Sets the TRIGger subsystem into its IDLE state.

The *RST command does not affect the following:

•State of the IEEE 488.1 interface.

•GPIB (IEEE 488.1) address of the instrument.

•Contents of the Output Queue.

•Contents of the Error/Event Queue.

•Service Request Enable setting in the SRE register.

•Transition filters in the status subsystem.

•Event registers in the status subsystem.

•Event enable registers in the status subsystem.

•Calibration data that affects the device specifications.

•Version number set by the SYSTem:VERSion command.

•Contents of the internal memory registers (*SAV/*RCL).

Example:

Send → *RST

Front panel compliance:

All settings not mentioned in the description are set according to the front panel fixed setup, which can be recalled by pressing the keys STATUS and TEXT OFF at the same time.