Fluke PM-3370B TRIGgerSEQuence1FILTerLPASsFREQuency NRf, TRIGgerSEQuence1FILTerLPASsSTATe Boolean

COMMAND REFERENCE 4 - 117

TRIGger[:SEQuence[1]]:FILTer:LPASs:FREQuency

TRIGger[:STARt]:FILTer:LPASs:FREQuency

TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe

TRIGger[:STARt]:FILTer:LPASs:STATe

Syntax:	TRIGger[:SEQuence[1]]:FILTer:LPASs:FREQuency <NRf>
				MINimum MAXimum
	TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe <Boolean>
Alias:	TRIGger[:STARt]:FILTer:LPASs:FREQuency <NRf>
				MINimum MAXimum
	TRIGger[:STARt]:FILTer:LPASs:STATe <Boolean>
	<NRf>	The cutoff		frequency expressed in hertz. Possible
		values are:
		-	0	Defines trigger DC coupling (MINimum).
		-	10	Defines trigger AC coupling.
		- 30000 Defines LF-reject (MAXimum).
	<Boolean>	0 OFF		Sets low-pass filter off.
		1 ON		Sets low-pass filter on.
Query form: TRIGger[:SEQuence[1]]:FILTer:LPASs:FREQuency?
				MINimum MAXimum
Alias:	TRIGger[:STARt]:FILTer:LPASs:FREQuency?
				MINimum MAXimum
Response:	0.00E+00 1.00E+01 3.0E+04
	If MINimum was specified, the minimum possible cutoff frequency

is returned, i.e., 0 Hz. If MAXimum was specified, the maximum possible cutoff frequency is returned, i.e., 30 KHz.

Query form: TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe?

Alias: TRIGger[:SEQuence[1]]:FILTer:LPASs:STATe?

Response: 0 1

0High-pass filter active (HF-reject).

1Low-pass filter active.