Fluke PM-3394B Configures AC-RMS CH2, Sets real-time mode on, Triggering is done at positive

COMMAND REFERENCE	4 - 123
Example:
Send → CONFigure:AC (@2)	Configures AC-RMS CH2.
Send → SENSe:SWEep:REALtime ON	Sets real-time mode on.
Send → TRIGger:SOURce INTernal2	Trigger source becomes
Send → TRIGger:LEVel .02	channel 2.
	Trigger level becomes 20 mV.
Send → TRIGger:SLOPe EITHer	Triggering is done at positive
	(rising) and negative (falling)
Send → INITiate	trigger edges.
	Initiates acquisition.
Send → FETch:AC? (@2)	Fetches AC-RMS value.
Read ← <AC-RMS voltage>	Reads AC-RMS value.

Front panel compliance:

The TRIGger:SLOPe command is the remote equivalent of the front panel TRIG1, TRIG2, TRIG3, and TRIG4 keys and the TRIGGER MAIN TB edge option of the TRIGGER menu.