Fluke PM-3380B, PM-3390B, PM-3370B Save instrument setup, Syntax SAV numericdata Description

COMMAND REFERENCE 4 - 25

*SAV	Save instrument setup
Syntax:	*SAV <numeric_data>
Description:

The *SAV command saves the current instrument settings into one of the internal memory registers 1 .. 10. The settings in memory register 0 are standard settings, which can only be recalled. The settings in the memory registers 0 through 10 can be recalled by sending the *RCL command.

Example:
Send → *SAV 2	Stores the actual instrument settings into
	memory register 2.
.
.
Send → *RCL 2	Restores the instrument settings from memory
	register 2.

Front panel compliance:

The *SAV/*RCL commands are the remote equivalent of the front panel softkey operation via the SETUPS/RECALL menu. The standard settings stored in memory 0 can be changed via the front panel FRONT SETUPS menu.