Fluke PM-3390B Executed. The unit of timeresolution is second, Frequencyresolution = NRf DEFault

COMMAND REFERENCE		4 - 71
<expected_time> =	<NRf> DEFault
	Specifies the time value that is expected to be
	measured. The unit of <expected_time> is second.
<time_resolution> =	<NRf> DEFault
	Specifies the resolution of the time measurement to be
	executed. The unit of <time_resolution> is second.
<expected_frequency> =	<NRf> DEFault
	Specifies the frequency value that is expected to be
	measured. The unit of <expected_frequency> is hertz.
<frequency_resolution =	<NRf> DEFault
	Specifies the resolution of the frequency measurement
	to be executed. The unit of <frequency_resolution> is
	hertz.
<reference_middle> =	<NRf> DEFault
	Range: 0 ... 100. Default value: 50
	Specifies the REFerence MIDDle level as a percentage
	of the HIGH value. See figure 3.2. The unit of
	<reference_middle> is volt.
<expected_period> =	<NRf> DEFault
	Specifies the value of the period that is expected to be
	measured. The unit of <expected_period> is second.
<period_resolution> =	<NRf> DEFault
	Specifies the resolution of the period measurement to
	be executed. The unit of <period_res> is second.
Response:	<NR3>
	Example: <1.25E-01>	= 0.125