Fluke PM-3390B, PM-3380B, PM-3370B INSTrumentNSELect INSTrumentSELect, Response DIG Anal, Dig

4 - 66 COMMAND REFERENCE

INSTrument:NSELect

INSTrument[:SELect]

Syntax: INSTrument:NSELect <NRf> MINimum MAXimum

INSTrument[:SELect] DIGital ANALog

<NRf>		1 2
1	MINimum	The digital mode (ANALOG key) is activated.
2	MAXimum	The analog mode is activated.
DIGital		The digital mode (ANALOG key) is activated.
ANALog		The analog mode is activated.

Query form: INSTrument:NSELect? [MINimum MAXimum}

Response: 1 2

1The digital mode (ANALOG key) is active. This is also returned when MAXimum is specified.

2The analog mode is active. This is also returned when MINimum is specified.

Query form: INSTrument[:SELect]?

Response: DIG ANAL
DIG	The digital mode (ANALOG key) is active.
ANAL	The analog mode is active.

Description:

Selects the analog or digital mode of the CombiScope by specifying a predefined number or name. When one mode is selected, the other mode is deactivated. After a *RST command, the digital mode (ANALOG key) is selected.

Example:
Send → INSTrument:NSELect 2	Analog mode is selected.
Send → INSTrument DIGital	Digital mode is selected.

Front panel compliance:

These commands are the remote equivalent of the front panel ANALOG key.